Material and preparatory work
The following materials are needed to build a waterfall by the pond:
- Pond liner and pond fleece
- Powerful pond pump with hose and accessories
- Sourstone or gargoyle
- Topsoil and sand
- Quarry stones, at least the size of a fist
also read
- Build a waterfall for a stream yourself - that's how it works
- Artificial waterfall: You will need these materials to build yourself
- Build a stream with a waterfall yourself - a brief introduction to simple options
Pour the topsoil next to the pond into a hill, at the top of which you will create a depression as a starting point for the waterfall. From this mini pond, model a steep, terraced trench towards the pond. This trench doesn't have to be as deep as it is for you Stream.
How to build the waterfall - step-by-step instructions
After the earthworks, fill the mini pond and trench with a layer of sand about 5 cm thick. The sand layer evens out unevenness and protects the pond liner from damage. Proceed in these steps:
- Mini pond and ditch with Pond fleece interpret
- Lay pond liner up to 20 cm beyond the edges and a little way into the garden pond
- Guide the pump hose either under the pond liner or around the outside of the hill
- Connect the hose to the pond pump and source stone and perform a test run
If the waterfall has proven to be functional after the test run, the decorative design is on the agenda. Layer the rubble stones in such a way that the earth and pond liner are hidden from view. Please brick with offset without cross joints. Optionally, you can build a dry stone wall, the joints of which can be planted with the help of substrate bags. Alternatively, you can give the waterfall wall reliable stability with mortar.
