The top 3 recommendations and buying guides

Our recommendations

Anyone who has to work on very narrow joints is well advised to use this inexpensive and handy tool. According to the descriptions of Amazon customers, the ergonomically shaped plastic handle sits comfortably in the hand, the narrow blade is sharp and stable. Of the Grout scraper is very suitable for small joints, for most of the other commercial joints Grout cleaner are simply too fat. The only negative is that the handle can occasionally slip out - provided you exert a lot of force on the tool - but can be put back in quickly.

This handy joint scraper scores with two blades. The narrow, pointed blade with a length of 6.5 centimeters is well suited for narrower joints, while the wide and two centimeter long side weeds and moss between coarsely laid paving stones are ideal removed. Both blades are made of stainless steel and are very robust. The plastic handle sits comfortably in the hand. It is slightly longer than comparable models, so that you can make better use of the leverage with this grout cleaner. At the end of the handle there is a practical eyelet where you can simply hang the tool on a hook when not in use.

If you don't like sliding around on your knees when removing weeds and moss between the terrace joints, then this joint scraper from Gardena Combisystem is the right choice. You can use the tool with the supplied handle as well as with a longer handle from the Combisystem range, whereby you have to buy the latter separately. Amazon customers report that the device is easy to use even with a long handle. However, the result is not as clean as when using it as a handheld device. The blade can be re-sharpened again and again if it becomes blunt, and you can also order replacement blades from the manufacturer if necessary.

Purchase criteria

blade

The most important criterion when buying a grout scraper is the blade. This must be well sharpened and made of a sturdy material as the tool is primarily should cut between the joints - with a blunt device you will get accordingly unsatisfactory Results. Make sure that the knives can be sharpened or re-sharpened. You can reorder replacement blades from expensive brands - the joint knives quickly become blunt with use. Also important is the width of the blades, which ultimately have to fit into the joints. For very narrow joints, you need a joint blade that is as narrow as it is pointed.

handling

Usually the joint scraper is used as a hand tool, i. H. it must lie comfortably and comfortably in the hand. In addition, you must be able to use a lot of force on the handle and blade without breaking one of them (or both). So make sure you have an ergonomically shaped handle so that you can hold and operate it easily. The weight also belongs to the handling. Here you should ask yourself before buying whether you would prefer a lighter or heavier tool - some cope better with the somewhat heavier grout scratches, as these increase strength can spend.

handle

Simple joint scrapers with a wooden handle sit comfortably in the hand, and the material is robust and durable. More ergonomic (and often more comfortable), however, are specially shaped plastic handles, which are often also specific Have comfort zones made of soft material or with extras such as rounded edges, knobs and angled handle ends wait up. These are used for greater security and ensure a better grip.

renewal

With some models - such as the joint scraper from the Gardena Combisystem range - you can attach longer handles to the blade and work comfortably while standing. These systems are useful if you find it difficult to bend down, for example, or if you have to clean larger areas and do not want to do this on your knees. However, these handles are usually not included in the scope of delivery, but have to be ordered separately.

Material and durability

Regardless of whether you opt for a cheap or an expensive joint scraper: It is always annoying when the tool quits its service after just a few uses. Therefore, pay attention to high-quality branded goods when buying, so that you are not disappointed with an inferior product afterwards. The blades should be made of stainless steel and sharpened.

frequently asked Questions

What does a good joint scraper cost?

Simple joint scrapers are available on Amazon for less than ten euros, more expensive models from brand manufacturers such as Gardena, Wolf-Garten or Fiskars are a bit more expensive.

Where can I buy grout scrapers?

You can find a particularly large selection of joint scrapers of different types and from different manufacturers on the Internet, for example in online stores such as Amazon. But also in the online shops of certain brands or from DIY and garden centers you will find what you are looking for and can compare offers and prices with just a few clicks. Do you want to pick up the respective product and check or If you would like good professional advice - for example for the purchase of a high-priced electric grout cleaner - it is best to contact a stationary specialist retailer. However, you can be unlucky here because the product you want is currently out of stock.

Which manufacturers produce joint scrapers?

In addition to the usual garden tools and tool manufacturers such as Gardena, Wolf-Garten and Fiskars, whose products are in Already presented in this guide, many different brands make grout scrapers and other grout cleaners here. These manufacturers, for example, also deliver good, proven quality:

• Bosch
• Stretcher
• Einhell
• Kärcher
• Wolfcraft

In addition, there are numerous other manufacturers who offer inexpensive and satisfactory joint scrapers. These are often available online.

What are the differences between a grout scraper and a grout brush?

The most obvious difference between a grout scraper and one Grout brush consists in the cleaning method: A joint scraper has one or more blades and cuts the joint cleanly. A joint brush, on the other hand, has bristles that can be flexibly adapted to the joints and panels and not only free them from weeds and moss, but also from stubborn dirt. This also means that you can only use grout scrapers for grout, but not for surfaces - grout brushes can.

Are there alternatives to the joint scraper?

Instead of a joint scraper, you can of course also use a kitchen knife or a wrench (or another pointed or use sharp tool). However, these are not designed for this purpose and will therefore not deliver the desired results.

Can't I just flame or chemically fight the weeds?

Of course, you can also simply cover the area with a gas burner or similar. ä. flame or large areas Herbicides respectively. Apply a chemical grout cleaner. Both methods are effective, but pose different dangers. With a little bad luck (and that happens more often than you think) and the wrong wind direction, you set fire to it the house, the garden shed or the garbage cans on fire, depending on what's nearby is located. Herbicides (including household remedies such as vinegar), on the other hand, are often forbidden on paved roads, especially since they can get into the groundwater and enrich it with toxins.

equipment

Extension handle

Tools and garden tools from the Gardena Combisystem can be combined with any number of handles from the same range. You can extend the handy grout scraper with a practical handle and then clean the grout comfortably while standing, protecting your back. The connection is made using a locking screw and is wobble-free.