You can do that yourself

When the sprinkler stops working

First of all, you should investigate the causes. Often it's just little things that make them How the sprinkler works affect. Possible causes:

• Nozzles are clogged or calcified
• Water pressure too low
• Leaking supply line
• Swivel part defective
• Small parts are worn out

Check that the water pressure is not too weak. See if that Water hose is also really tight.

Clogged nozzles

If the water comes out intermittently, the nozzles may be clogged. This often happens when you're using groundwater or pond water Sprinkle the lawn. Even with very hard water from the pipe, the nozzles clog. The built-in rubber part that seals the nozzle head is more likely to come off.

You can fix the problem yourself by disassembling the nozzle head and cleaning the nozzles. Gardena sprinklers have a built-in sieve that catches dirt particles. This sieve needs to be cleaned regularly. The rubber seal can usually be reattached.

Swivel part no longer moves

Check that the settings on the side are correct. If something is not properly engaged here, the swivel part is blocked.

After the winter break it can happen that the swivel part is rusty. A little fat helps to make it flexible again.

If you cannot find the cause, you may need to replace the pan head.

Take apart the sprinkler

Often the cause can only be identified if you have the Lawn sprinkler(€ 27.99 at Amazon *) disassemble. However, you should be careful when using one Dismantle the Gardena lawn sprinkler. Improper repairs will invalidate the manufacturer's warranty.

In the case of older devices, it is worth taking a look at the manufacturer's website or calling them directly. Sometimes solutions can be found together to repair the sprinkler.

Tips & Tricks

No Lawn sprinkler lasts forever. If you pay attention to high-quality workmanship when buying the lawn sprinkler, you can enjoy it longer. Quality sprinklers are much more expensive, but spare parts can usually be procured for them.

Ce