Like every pool that is used by humans and filled with water, the water in a whirlpool becomes cloudy. This is caused by a lack of water change, which should always be done at regular intervals. This means that you only bathe in fresh water that is free from numerous impurities. How often and when to change the water in the hot tub is extremely important.
Why a water change?
Many spa owners wonder what a water change is for? This is especially the case if this is your first time getting one Place the whirlpool in the garden or it stands on the terrace and is used. The water change is necessary because of the numerous deposits that lead to pollution of the water. These stains range from a slight cloudiness to the formation of putrid smells that are very unpleasant. In addition to regular maintenance measures, the water change is necessary to maintain the quality of the water. Since in this case you drain slightly to heavily used water from the whirlpool and replace it with fresh water, you can enjoy your time in the pool again. The following causes are responsible for cloudy and unpleasant smelling water:
- used disinfectants
- used care products
- Neglected care
- organic materials such as leaves
- dead insects
- Body fluids
- Oils and fats
- hair
- wrong pH
- high temperatures
- intense sun exposure
- Pollen
- Rainwater
frequency
In addition to the actual time of the water change, it is important to know how often it has to be carried out. The water change depends, of course, on the degree of pollution of the water, which can become very cloudy within a short time if maintenance is neglected. Of course, you should change the water immediately if it is very cloudy or smells really bad. But you can counteract this problem if you change the water in the hot tub regularly. Precisely defined intervals are recommended, as these are particularly effective against dirt. The following list gives you an overview of how often a water change is recommended based on the level of pollution:
- slightly cloudy: twice a year
- slightly to moderately soiled: three times a year
- heavily soiled: immediately or every two months
As you can see, the frequency is highly dependent on the water quality and for this reason it is always isolated. If you find slightly cloudy water within several months that does not really smell unpleasant, you only need all six
Consider changing the water for months. On the other hand, if the hot tub is used heavily or is not protected from the elements, it may need to be changed every two months. Most frequently used whirlpools fall into this category. Especially when many different people enjoy the whirlpool, numerous dirt particles settle in the water. You can delay this with the tips below.time
As with a pool, you should choose the right time for each change interval. In this way you maximize the effect of the change and at the same time reduce the cleaning work required over the coming months. The time does not depend on the degree of pollution of the water in the whirlpool, but on the seasons. Especially during the summer months it is important not to let the water tip over, which you can do by changing the water at the right time. Depending on the selected interval, you should start with one of the following times for the water change:
- early spring
- after intense pollen count
- End of autumn
The first water change in the year is particularly common in spring. This removes dirt from the winter time and at the same time refreshes the water for the coming summer. If your whirlpool is well protected over the winter, it is better to switch to the middle or end of May, as the pollen count is over in many regions at this time. If the water is changed every six months, the water in the whirlpool is renewed according to the frequency in spring and late autumn. These dates make implementation easier and optimize the result.
Note: If you have a constantly filled whirlpool in the house, you can of course decide completely yourself when to change intervals. However, it is worth changing before summer, as this is the time when people use the hot tub more, especially if they are frequent visitors.
Make cleaning easier when changing the water
Changing the water always includes cleaning the pool, which can be quite time-consuming, depending on how much the whirlpool has been cared for up to now. The reason for this are the deposits already mentioned above, which can get out of hand due to a lack of care measures. This is especially possible if you only clean the whirlpool while changing the water and otherwise take little care. In this
In this case, the change is necessary much earlier. With the following tips you can postpone the time of the water change to a full six months:1. Have a shower: Don't underestimate the power of a quick but thorough shower. This removes numerous triggers for cloudy water from your skin, keeping the water much cleaner. Especially after you have washed yourself with soap, you should never go into the hot tub without a shower.
2. Swimwear: Don't forget to shower your bathing suit next to your body if you wear them in the hot tub. Soap residues, sweat and oils can accumulate, especially in men's swimming trunks.
3. PH value: Yes, the pH in a hot tub is important if it is constantly filled with water. If this is not correct, the water becomes unstable within a short time and can tip over, which can lead to strong cloudiness and a putrid smell. Whirlpools should have a pH value between 7.0 and 7.5 so that the water remains stable and does not have to be changed as often.
4. Filter cleaning: Don't forget to clean your filter regularly. A water change every two months is necessary if you do not clean the filter often enough to enable its optimal performance. Clean the filter every four weeks, even in winter if you use it during the cold season. A clean water filter does a lot of work for you if you spend a lot of time in the hot tub.
5. Disinfection: It pays to treat hot tubs with a disinfectant every or every two weeks. Disinfection is particularly effective in summer, when it is used more frequently. The remedies only have to be added to the water to be effective. This is a very good way of preventing cloudy water.
With these tips it will be easy to maintain the quality of the water over a longer period of time. This is particularly necessary in frequently used or unprotected whirlpools and can save you a lot of work.
Tip: Obtain a cover for your hot tub, which is mainly used during the annual pollen season and autumn leaf fall. In this way you protect the pool from organic materials that would cloud the water, which at the same time delays the necessary change.
