Line the raised bed with foil

Damp wood rots quickly

The substrate in a raised bed should always be as moist as possible and not dry out. Wood, on the other hand, must never come into contact with damp earth, otherwise it will rot quickly. Therefore, you should always set up such a bed so that the lower edge can dry off quickly after a rain shower. Ideally, your raised bed has a plastic or metal profile to protect it from ground moisture so that the wood does not come into contact with the ground in the first place. If this is not the case, you can also place the bed box on a row of plates or stones. On the other hand, protect the inner walls of the raised bed with a robust film.

Which foils are suitable for lining a raised bed

Water-permeable fabrics such as fleece are not suitable as bedding because there is no protection against moisture here. Are suitable for this

Rubber, PE and PU filmsnormally used for pond construction. Pond liner in particular, which has to keep large quantities out, is ideally suited for this purpose: it is very robust, tear-resistant, absolutely impermeable to water and rot-resistant. If you want to use parts left over from the pond construction, the individual strips should overlap by a good ten centimeters at the seams. Also specially made for the construction of a raised bed Bubble wrap can be used. This usually has the advantage that - in contrast to conventional pond liner - free from harmful plasticizers is. In addition, the dimpled film is used for drainage, as excess water is drained away along the bed walls.

Raised beds that can do without any foil

The sole purpose of lining the raised bed with foil is to protect the wooden bed box from moisture damage. Of course, such a protective measure is not necessary for all raised beds: beds made of high-quality aluminum, Corten steel or stone, for example, usually need no additional lining, as these materials are more or less resistant to moisture. Basically, plastic does not need a lining either, but attaching a (harmless) film makes sense here for other reasons. Plastic often releases harmful substances to the substrate, so that a film is inserted as protection against it.

Line the raised bed with foil - this is how it's done

Lining the raised bed with foil is very straightforward: the best thing to do is to simply fold the foil over the edge and secure it with a cover board. But you can also staple or staple them on the inner edge with a fabric tape and large, stainless staples Roofing felt nails attach. Attaching a fabric tape makes sense as it can prevent the film from tearing off. No further fastening of the foil is necessary. So you can hang it loosely in the bed, but should at least reach down to the ground.