How does a bird bath have to be?
A bird bath is basically a wide bowl that is filled with water for birds. It should be rather flat at the edge and take more depth towards the middle. However, it should not be deeper than 10 cm. It is also important that the surface is not sharp-edged but also not too smooth. Otherwise the birds will slide while standing or Take a bath. Apart from that, you can design the bird bath according to your own ideas.
also read
- Making birdbath out of stone yourself - demanding work
- Make your own clay bird bath - this is how it works!
- Make bird bath yourself - this is how you create a mosaic
Note:
The good thing about concrete is that it does Winterized bird bath and its owner can provide the birds with water even in winter when other bodies of water are frozen.
Concrete as a material
Concrete is a material that can be brought into almost any shape. Provided that there is a shape and a counter-shape available, between which the concrete itself can assume the desired shape. These do not have to be specially made for a potion. You can make do with two artificial bowls. These materials and helpful utensils are required:
- 2 different sized plastic bowls
- Concrete, water, bucket and trowel
- Cooking oil and brush
- Pebbles or sand
- Sanding sponge
- Hand Brush
Tips
Fine dust can be inhaled when mixing concrete and later when sanding the bird bath. Use a respirator for these two steps. You can get these in any hardware store.
Instructions for a bowl shape
- Brush the inside of the large bowl generously with some cooking oil to prevent the concrete from sticking to it later.
- The small bowl, on the other hand, has to be coated with oil on the outside.
- Mix the concrete as described on the packaging.
- Fill the concrete into the large bowl.
- Place the small bowl in the concrete and press it if necessary. still on.
- Fill the small bowl with sand or pebbles to weigh it down.
- Let the whole thing dry in a rain-protected place for 2-3 days.
- Then carefully detach the concrete form from the two bowls.
Grind potions smooth
Process the concrete drinkers with the sanding sponge. The goal should be to get rid of any sharp spots. The inside of the shell should remain roughened, while a smooth surface looks nicer on the outside. You can brush the fine dust off the drinking trough with a hand brush.
Before you the Set up bird bath, you can paint them with suitable colors as you like.
