AT A GLANCE
How to remove red algae in the pool?
How can red algae be detected in the pool?
Red algae can due to their unmistakable red coloring easily recognized by other algae species. These are among the most stubborn types and must therefore be treated in a somewhat more complex manner. These are prioritized pool floor and stuck to the walls. The removal requires a little patience, but is possible with simple care measures without leaving any residue.
also read
Can red algae be completely removed from the pool?
If algae appear in the pool, you do not necessarily have to carry out a complete water exchange. The red algae can entirely removed become. Simple cleaning measures help to remove the growth without leaving any residue. The best way to do this is as follows:
- Measure the pH of the water.
- Loosen the algae with a soft brush.
- Remove the growth from the water.
- Do a shock chlorination.
- Check that PH value and the chlorine level again.
- Let the pool pump run for a few hours.
- Cover the pool with a tarp.
Are red algae dangerous in the pool?
Algae are generally considered harmless. Also make red algae no health hazard represent. Swimming in the pool does not necessarily have to be stopped. However, the spread should still be contained, as further growth of the plant can gradually make swimming more difficult. In this case, diving should also be avoided, as visibility can be severely restricted. In addition, algae develop foul-smelling gases after a while, which should not necessarily be inhaled.
Tip
Proper pH can prevent red algae from forming in the pool
The pH value is particularly essential for maintaining clear and hygienically clean pool water. For this reason, it should be neither too low nor too high. Therefore, check the value at regular intervals to prevent algae infestation. The measured value should always be between 7.00 and 7.40. If this value deviates, you should regulate it immediately.
