AT A GLANCE
If the pH value in the pool water is too low, algae formation can be promoted. To effectively remove algae, measure pH, loosen algae from pool wall and bottom, remove debris, shock chlorinate, and turn on the sand filter a.
Will algae grow if the pool water pH is too low?
If the pH of the pool water is too low, the promotes algae formation become. Therefore, make sure that the value is always in a range between 7.00 and 7.40. If the pH deviates, algae in the pool grow unhindered. This can lead to a tipping point in the water in the long run and should therefore definitely be kept in mind Eye be kept.
also read
How to remove algae due to low pH?
If the pH of the pool water is too low, you should add some important steps to eliminate the algae. The best way to treat the infestation is as follows:
- Measure the pH of the water and check the chlorine level.
- Solve the Algae from the pool floor and from the walls. A soft brush is particularly helpful.
- Now remove all debris from the water.
- To thoroughly clean the pool, you should then perform a shock chlorination.
- Check the pH one more time.
- Finally, you should switch on the sand filter system.
Tip
Algae formation at an increased rather than too low pH value
If you measure a too high pH value of your pool water, you should fix this as soon as possible. You can use a simple home remedy for this. To lower the pH, all you should do is mix some vinegar into the pool water. You need one liter of cheap vinegar for about ten cubic meters of water. Be sure to note the amount you need.
