AT A GLANCE
How do I use joint sand against ants?
Where is joint sand used against ants?
Joint sand is typically used under paving slabs in the garden or on terraces deployed. The material ensures a level pavement surface and prevents ants from digging between the cracks of individual slabs or under the slabs. Undercutting of this type could cause plates to loosen or uneven areas in the Pavement caused by ant infestation. ants on the terrace are also annoying as they can work their way into the house from this area if you don't have any home remedies ant control insert.
also read
Which joint sand works best against ants?
Above all polymeric joint sand is suitable. The material is water-permeable, very erosion-resistant and ecologically harmless. After professional application, it keeps ants away even more consistently than with
quartz sand the case would be. Note when terrace joints and plaster joints Fill in the following things:- Before laying the paving, apply the joint sand to the surface underneath.
- Then lay the pavement completely.
- Treat this with a vibrating plate.
Is joint sand only effective against ants?
Joint sand also holds paved surfaces weed free. With professional application, you can to a certain extent prevent plants from regularly making their way between the plates. The material is also popular because of this additional property. So you not only avoid ant trails, but also have less work in the future with the care of the paved surface.
Tip
Match the grit to the width of the joints!
You can achieve the best possible effect by adjusting the grain size to the width of the joints. In the case of very narrow panel joints, use the smallest possible grain size of around 0.1 mm. Normally, however, a grain size between 0.5 and 0.5 mm is sufficient for grouting.
