Tile the bathroom correctly: half-height or room-high?

click fraud protection
Home page»DIY»expansion»tiles»Tile the bathroom correctly: half-height or room-high?
author
Home editorial office
3 minutes

Table of contents

  • The height of the wall tiles
  • a matter of taste
  • question of cost
  • Advantage of complete tiling
  • Where room-high makes sense
  • Disadvantages of tiles

There is no question that the bathrooms will be tiled. However, there are different opinions as to the height up to which wall tiles should be attached. There are many reasons for one or the other possibility.

video tip

The height of the wall tiles

The alleged risk of mold in bathrooms that are only partially tiled is often given as the reason for tiling the entire walls. In fact, there isn't much of a difference between fully tiled bathrooms and partially tiled ones. The tiles themselves don't usually get mouldy, but the joints do, which can look very ugly over time.

A notice:

Good ventilation is always necessary, regardless of the height of the tiles in the bathroom.

a matter of taste

Since there are hardly any factual reasons for one or the other variant, the height of the wall tiles can be chosen according to personal preferences. Depending on the type of tile, a fully tiled room can quickly appear very cold and sterile, similar to a slaughter room. On the other hand, tiles in warm tones can exude a cozy atmosphere. A half-height tiled bathroom allows more design freedom. Not only in terms of the upper part of the walls. Subsequent changes, including tiling, are also possible.

A notice:

Tile stickers also bring variety to bare-looking walls.

question of cost

As a rule, it is more expensive to tile a room all the way to the ceiling than to only install half-height tiles. But that depends heavily on the choice of tiles or the price of a corresponding alternative.

Advantage of complete tiling

Bathroom tiled floor to ceiling

The most important, if not the only, sensible argument for floor-to-ceiling tiles is that they are easy to clean. They are only wiped damp with an all-purpose cleaner and dried if necessary. However, it should always be borne in mind that this advantage can quickly be reversed if the joints between the tiles are moldy or otherwise dirty. Because these are much more difficult to clean thoroughly. Especially when it concerns the joints in the upper part of the walls. It may even be necessary to replace them and that takes quite a bit of effort.

Where room-high makes sense

Regardless of personal taste, high tiling makes sense wherever splashing water on the walls is unavoidable.

  • Shower
  • Bathtub
  • Toilet
  • vanity
  • heated towel dryer

However, the height of the tiles also depends on the height of the room and the height of the bathroom fittings. Half-height tiling can be sufficient for a toilet, while a shower is always tiled room-high. Unless a full shower stall is installed.

Disadvantages of tiles

If a bathroom is completely tiled, the effort is very high if it is renovated. A simple color change is only possible with special adhesive foil or tile paint. Both variants are more work than simply painting a plastered wall. The only other alternative would be to knock the tiles off the wall completely and replace them with others.

A notice:

When a bathroom is re-tiled, it is always a good idea to keep some spare tiles in case the tiles become damaged over time.

author Home editorial office

Learn more about tiles

tiles

How much tile adhesive per square meter | Information on consumption

Tiles can easily be laid yourself if you know the right procedure. In order to save costs, however, the correct amount of tile adhesive must also be selected. We provide information on consumption.

tiles

Painting tiles – tips for using tile paint

Painting tiles is possible, but requires careful preparation and will block the bathroom for some time. The paint systems and various application tips for tile paint are presented and described in the article.

tiles

Remove tile adhesive: Remove tile adhesive residue from the front

Newly laid tiles let every room shine in fresh splendor. However, even the smallest spot on them is noticeable, which makes adhesive residue all the more annoying. We reveal how the tile adhesive can be removed from the front.

Flooring: laminate / vinyl / carpet

Leveling the ground: 3 alternatives | Tile adhesive & Co

In addition to tile adhesive, builders have numerous alternatives to choose from to prepare a floor for laying a new floor covering. But to what extent do the leveling compounds differ from each other, how are they to be used and what costs can be expected?

terrace and balcony

Laying tiles on the balcony: 6 options

A tile covering makes balconies durable, resilient and, last but not least, easy to clean. But only if you lay the coverings correctly is the success of a lasting nature. Therefore, you should know the common methods before you take action.

Paints & Varnishes

Remove Tile Paint - How to remove paint from tiles

You want to paint your old tiles in a new color or the old paint is peeling off and needs to be renewed? Before you can repaint the tiles, you have to remove the old tile paint first, which requires a little work.