Clean terrace slabs with baking powder, soda & co

You can easily clean terrace tiles without chemical cleaning agents or great effort if you have the right home remedies at hand. You receive the material used for the plates and ensure cleanliness.

Basic cleaning with detergent

In order to be able to use the means listed below, a thorough cleaning is recommended beforehand. Start by removing moving furniture and objects from the patio and looking for them Have a day when it doesn't rain and the sun isn't too strong on the terrace appears. Proceed as follows:

• Sweep the terrace
• Remove green waste with a leaf broom
• Moisten the plates
• work with a scrubber
• Clean stubborn stains with washing-up liquid and water
• Work in with a brush
• Contact time: 20 minutes
• Rework with a brush
• wash up
• let dry

Tip: For basic cleaning, however, you should use a biodegradable cleaning agent. Such products protect your soil, do not have a negative impact on groundwater and are not harmful to humans, animals or plants.

soda

Soda is a great way to clean decking made of wood, WPC and concrete. After the basic cleaning, the agent can be used to clean the terrace after a long time, when the dirt has settled. The powder is used differently for each material. To get concrete slabs clean, mix a paste of a tablespoon of soda and a little water. Apply, work in and leave for five to six hours. Then rub off and rinse with water. If wooden or WPC terraces are to be cleaned, you must proceed as follows:

• Sprinkle the powder on the terrace
• Contact time: 1 to 2 hours
• Rinse with clean water
• work with a scrubber if necessary
• Finally, sweep the water from the terrace

If you're not sure if the soda is too harsh, apply it to an invisible area. In this way you can be sure that your terrace is not damaged.

Soda instead of baking powder

Soda has also proven to be effective for cleaning patio tiles. Thanks to its ingredients, it has an effective effect, especially on natural stone, without damaging it. This is not the case with baking powder, which is popular as a substitute for baking soda. Baking powder is enriched with a portion of starch and a portion of acid, which has a negative effect on the structure and color of natural stones. For this reason, baking soda is ideal as a cleaning agent for your terrace. To use it, follow these instructions:

• Moisten the terrace with lukewarm water
• Spread the powder generously
• Work in with a scrubber
• then rinse with clean water

Baby powder

Baby powder can be used to clean Grease stains use on all terrace slab materials. The dry properties of the powder pull the fat out of the top layers of the material, which makes cleaning noticeably easier. At the same time, the agent is gentle and does not pose a risk to the panels. Sprinkle the powder on the grease stain and let it work for about 24 hours. Then it is rubbed with a damp cloth and rinsed with water. Repeat if necessary.

cola

Due to the phosphoric acid it contains, cola is an ideal cleaner for rust stains on all materials from which terrace slabs are made. The amount is so small that it does not discolour or damage the surface. Since rust stains usually occur locally, the application is only slightly time-consuming and can be implemented without great effort. In addition to the soft drink, you will need a lint-free cloth and a brush. Ideally, flash rust should no longer be present after thorough cleaning. Apply the remedy as follows:

• Soak the cloth in cola
• place on rust stains
• Let soak for 12 to 24 hours
• rub off afterwards
• use a brush as needed
• Rinse with clear water

Note: An alternative to cola is lemon juice mixed with heated water, which is applied in small quantities to a cloth and rubbed over the rust stains until they are gone. Remove the residues of the mixture with a damp microfiber cloth so that the panels do not discolor afterwards.

high pressure cleaner

The subject of high-pressure cleaners is often discussed in relation to patio slabs. Although it is possible to clean the plates effectively with the device, the pressure can damage natural stone plates. For this reason, the use of the device is not recommended, which is not necessary. With the right equipment for your pressure washer, you can use it easily without damaging the plates. You need a cleaning or washing brush attachment. These are available in hardware stores or internet shops for a variety of models. The water pressure is weakened by the attachment by rotating the jet and using two or more nozzles. With the attachment, even the joints can be cleaned without any problems. When using this method, pay attention to the following points:

• work away from the facade
• Splashes on the facade are avoided
• Thoroughly clean the terrace slabs
• Don't forget the joints

Alternatively, you can use the high-pressure cleaner without an attachment at a height of at least 30 centimeters. You should reduce the pressure significantly, especially in the joints, in order to avoid possible damage.

frequently asked Questions