To the cheaper sidewalk options there is a way out of simplicity Concrete slabs. Natural stone slabs, on the other hand, are much more decorative, but also more expensive, and you can buy them in various designs in hardware stores. Plastic paving slabs are also cheap at the moment. On the other hand, due to their low weight, they are easy to carry and transport.
also read
- How do I design a beautiful garden path?
- How do I design my garden path as a mosaic?
- Can you water a garden path yourself?
When does a paved garden path make sense?
Paths that are used very often are mostly fully paved. This includes, for example, the way from the garden gate to the front door. That makes perfect sense, because this path should be safe to walk at any time and in any weather, even for strangers like him Postman.
Snow is easy to push on a paved path and it doesn't get muddy or slippery from heavy rains. This way, as little dirt as possible is carried into the house. If the panels are laid evenly, there are no tripping hazards on the way. Even cleaning such a path is quite easy. A paved path is therefore comfortable and easy to care for, but a bit more complex to manufacture.
When are individual stepping stones best suited?
Individual stepping stones are suitable, for example, for relatively little-used paths or for lawns. If you often walk the same path over your lawn, over time a "beaten path" will emerge there. The grass grows slowly at this point and soon a bare path can be seen. Then at the latest you should think about a way out of step plates.
If the stepping stones are laid correctly, they will not interfere with mowing the lawn. So be sure to put them at ground level. Compared to a fully paved path, one made of stepping stones is much cheaper and more flexible. You don't have to Substructure and can later place individual slabs in other places or change the course of the path entirely.
Can I cast paving slabs myself?
If you don't like the paving slabs in stores or if you just want to use your creativity and skill, then you can too Pour the pavement slabs yourself. To do this, you need a casting mold, dry concrete, water and well-fitting work gloves. A simple square frame made of slats is suitable as a casting mold. If you want to produce many panels, it is best to use several frames, otherwise the work will take an extremely long time.
Options for paving slabs:
- finished concrete slabs
- Plastic panels
- various natural stone slabs
- Pour the pavement slabs yourself
Tips
If you are reasonably skilled in your craft and you have enough time, then you should pour your paving slabs yourself. Your garden path is sure to be unique.
