WaterInstallation

Domestic waterworks: how to increase the pressure

If there is no longer enough water available in the pressure tank of a domestic waterworks, the pressure must be increased. The following guide shows how the setting can be made.Minimum and maximumThe domestic waterworks is a system that is regulated by two settings, among other things: the minimum pressure and the maximum pressure.If the pressure falls below the minimum, more water is pumped. How much and how fast the water is pumped depends on two factors. On the one hand, on the size of th...

  • 15-Nov-2021
  • 0
  • 99
  • 0
WaterDomestic Waterworks: Set The Pressure CorrectlyInstallation

Domestic waterworks: set the pressure correctly

Correct setting of the pressure in a domestic waterworks is crucial for the flow rate and the safety of the device. We show you how to do it here.Minimum pressureThe minimum pressure or minimum pressure is what is known as the cut-in pressure. This determines when the system switches on. It should be between 1 and 2 bar. 1.5 bar is often ideal. However, this is an estimate that must be varied depending on the system and the water column.However, it should not be less than 1 bar. Because the s...

  • 15-Nov-2021
  • 0
  • 92
  • 0
WaterInstallation

The domestic water system does not switch off: what to do?

A domestic waterworks has numerous advantages. However, if it no longer switches itself off, action must be taken as quickly as possible. Missing repairs can make the problem worse and increase costs.causesThe permanently running domestic waterworks can have various causes.z. B .:a leak in the line or a leaky connectionIncorrect settings on the pressure switch or the pressure monitorFaults or damage to the pressure switch or the pressure monitorDelivery line is too deepdirty filtersProblems w...

  • 15-Nov-2021
  • 0
  • 39
  • 0
WaterInstallation

Correctly increase the water pressure in the shower

Showering is only pleasant with a lot of water pressure. However, if a small trickle flows out of the shower head, an increase in pressure is required. If there are certain causes, you can solve the problem yourself.Shower head & hoseCommon causes of low water pressure in the shower include calcified and clogged shower heads and hoses. Limescale deposits can usually be seen on the outside of the shower head. To check the inside, the shower head must be disconnected from the hose. Then tur...

  • 15-Nov-2021
  • 0
  • 82
  • 0
WaterInstallation

Domestic waterworks do not draw water: what to do?

The domestic waterworks can be an alternative or an addition to the regular supply of water. If there is no water, energy is consumed but the function is no longer fulfilled.Possible causesThere are many potential reasons why the domestic waterworks no longer draws water. In addition, they are dependent on the respective type of domestic waterworks. These are differentiated into:self-priming pumpsnon-self-priming domestic waterworksself-venting devicesnot self-bleeding pumpsKnowing the type o...

  • 15-Nov-2021
  • 0
  • 14
  • 0
WaterInstallation

The tap is stiff: the solution for single-lever mixers

The single lever mixer is very practical and can be used in many ways. Faucets are available for the bathtub and shower, but also for the wash basin and kitchen sink. The fittings are durable and can remain in use for many years. Sometimes they are stiff or squeaky. You can remedy this with various measures.Single lever mixer and possible problems with its useSingle-lever mixers convince with their simple functionality, but also with their durability. In principle, it is not a problem to use ...

  • 15-Nov-2021
  • 0
  • 7
  • 0