Log splitter no longer works

Vertical or horizontal log splitter

Log splitters are available in two different designs: horizontal (lying) and vertical (standing). Private individuals usually have horizontal log splitters, as these are significantly cheaper, more manageable and easier to transport. However, they are also more prone to defects because they are designed for less strenuous work, that is, for thinner wood. In the following, we will explain the most common causes of errors with the horizontal log splitter.

Where is the problem?

With horizontal and now and then also with vertical log splitters, one problem occurs again and again: The log splitter no longer starts up, so it gets stuck in the wood, so to speak. There can be different reasons.

Causes of malfunction

First of all, you should make sure that there is a defect at all and check the following:

• Does the log splitter have enough gasoline or is the power supply available?
• Is the wood that hard or too big?
• Has the log splitter been supplied with sufficient oil and hydraulic fluid?

Once you've checked these basics, it's time to do the small-scale work. In order to be able to take a closer look at your log splitter, you should remove the cover. then
look for spills, leaking hoses, and loose bolts. Because the error can have the following causes, among others:

• Screw loose
• Oil filter clogged
• used seals
• leaking valve
• Hoses are leaking
• bent parts

How to fix your log splitter

If you have one of the problems mentioned above, you can fix it yourself, for example by B .:

• Refill hydraulic fluid and / or oil
• Replace valves, hoses or seals
• Tighten the screws
• Clean or replace the oil filter
• replace individual parts

When should an expert be consulted?

You cannot repair everything yourself. If the engine is damaged or you cannot determine the cause of the damage, a specialist should be consulted. The repair is usually worthwhile, because a cheap log splitter costs at least 150 euros new.