Table of contents
- Lawn stones – can be used in many ways
- Laying lawn stones - preparation
- Laying lawn stones - step by step
- Greening lawn stones - sowing lawn seeds
- Conclusion: worth knowing about laying lawn stones
Lawn stones, also lawn grid or grass pavers called, are an interesting way to attach a surface and still create an attractive look. You can easily lay these stones yourself without any previous knowledge, as they are very handy and no complex tools are required for laying. They are very discreet in appearance and adapt to any environment.
Lawn stones – can be used in many ways
Lawn stones can be used in all areas around the house. They are ideally suited as a base for a car parking space. The stones also look chic as a sidewalk or as an area in front of a house. Lawn grids are also ideal for securing a surface in the area of the garbage can, in front of a garden shed or around the compost. With a little skill and creativity, the stones can also be used to create very interesting accents Bring the garden by laying a larger area with it and maybe light balls in this area brighten up Especially for people who are looking for an alternative to the classic flower beds, an interesting garden area can be realized.
Laying lawn stones - preparation
First of all, of course, the area that is to be laid must be measured in order to get the appropriate amount of lawn stones. Due to the small and handy shape of the stones, it is not absolutely necessary to have the stones delivered. A trailer, which can often be borrowed from hardware stores, is sufficient to transport the stones. In addition, the following materials are required:
- rubber mallet
- straight board at least 50 cm long
- shovel
- pounder
- several small sticks, pegs or the like
- twine
- level
- some sand
- upon need lawn seed or gravel
The somewhat experienced do-it-yourselfer has most things in his tool kit, but others can also be used. The board is used to level the ground and can be made of wood, sheet metal or similar. The tamper can also be used to level uneven areas, a container filled with sand or similar can also be used for this. The sticks are used for marking, the material is also irrelevant here, they just have to be at least 10 cm high when stuck into the ground. If everything is ready, you can start.
Laying lawn stones - step by step
- First of all, the subsoil has to be prepared: Depending on the situation, plants have to be removed, other stones have to be removed or existing lawns have to be dug up. The earth, which serves as the subsoil, should be loosened well before it is then tapped firmly again. To get the surface as straight as possible, smooth over the surface with a board or similar and remove excess soil. Flatten again and again in between. The easiest way to do this is with a tamper if you don't have one, but you can also use a bucket of sand, the back of a shovel, or something similar. It is important that the loosened soil is pressed back together as firmly as possible so that no air pockets form, which could later sink in. Depending on the subsoil, a couple of shovels of sand can be mixed under the ground to help level it.
- Once a hard, even surface has been created, sticks, pegs or something similar should be stuck into the ground at least every fifty centimeters. It is particularly important that they face each other in a straight line. The opposite sticks are then connected with a piece of string or something similar. Accuracy is very important in this work, because the threads serve as a guide so that the Lawn stones can also be laid straight afterwards. This means that if the first stretch is crooked, the entire surface could possibly become crooked. If available, modern laser measuring devices can also be used here, and then there would be another one A board or something similar is required, which is placed upright so that a fixed point can be fixed can.
- Once the cords are stretched, you can get started and the lawn grids can be laid. Start with a straight line and work your way stone by stone. The taut threads now ensure that the lawn stones are not laid crookedly and the lawn grid results in a straight pattern.
- A rubber mallet is used when laying the stones so that the stones settle down a bit. The lawn stones can be optimally tapped without a too hard impact driving them too far into the ground. A spirit level can be very useful here, so that the surface is level and every stone is balanced. Stone by stone, a beautiful and even lawn grid is created.
Greening lawn stones - sowing lawn seeds
Now leave the lawn stones for a night or a few days before sowing the lawn. You still have the opportunity to repair any imperfections. It may be necessary to spread some soil on the lawn stones, which can be brushed into the Gaps from the lawn grid must be distributed so that there is enough breeding ground for the lawn seeds is. However, this is not always necessary if the soil is already high enough or if there was already a soil under the lawn grid lawn, the seeds can now simply be spread over the lawn stones and in turn distributed evenly with a broom become.
In the next few days you must not forget to water the area regularly, then the seeds will germinate quickly. If the growth is too high, the lawn stones can simply be removed with a mowing machine be driven off.
A nice alternative to the lawn is to fill the lawn grid with small gravel or crushed stone. This is available in many colors today and can also set beautiful accents. With a leaf vacuum, the lawn grid can be cleaned quickly, even in autumn.
Conclusion: worth knowing about laying lawn stones
- Lawn stones are a practical and versatile variant for the entire outdoor area. They are easy to install yourself and very easy to care for.
- Lawn stones come in all shapes and sizes, with different resilience. There are also lawn stones made of different materials such as concrete or plastic.
- Concrete lawn stones have regular hole inserts. After laying, the cavities are filled with earth or with earth-sand mixtures up to the upper edge and then the seeded lawn.
- Due to the natural settling process, the later lawn surface is slightly below the concrete edge and is therefore in a kind of protection zone.
If the soil is light, you can lay the stones directly in a layer of sand about five centimeters thick. If the floor is heavy, a 15 centimeter thick layer of crushed stone should serve as the substrate before laying. If the lawn stones are lying on the ground, they should be secured with a vibrator.
Due to their low weight, plastic lawn stones are much easier to lay than concrete stones. The biggest difference, however, is that with plastic a complete greening is possible and the gray concrete walkways are omitted. From a purely visual point of view, more lawn can be seen than is the case with concrete lawn stones.
- Laying the plastic lawn stones is easy and very quick. Most plastic lawn stones have a hook and eye principle, with which the plates are firmly connected to each other.
- The floor structure is very similar to the floor structure of a paved path. The base layer usually consists of a recycling material, the leveling layer consists of sand or grit and the slab filling consists of turf soil.
- Plastic lawn stones usually cannot cope with the force of a vibrator, so strengthening should be done mechanically.
garden editorial I write about everything that interests me in my garden.
Learn more about garden path - paths in the garden
Creating a garden path: instructions | 8 ideas to design
If you want to create a garden path, you have a variety of options when it comes to the materials to choose from. In most cases, the method should be simple and cheap and not contain any tedious work steps. The ideas presented can even be used to expand a network of paths in the garden.
Cleaning paving stones and concrete slabs: Vinegar, chlorine & Co - what helps?
Anyone who has laid concrete slabs and paving stones in the garden knows that they also have to be cleaned regularly, as moss and weeds quickly settle here due to the weather. But which means is useful for cleaning. What works better, vinegar, chlorine or a high-pressure cleaner?
Stone cleaner for walls, walls and stairs - clean concrete properly
Concrete in the interior looks beautiful; but only in the long run if you know how to clean the concrete properly and/or have the right stone cleaner. The article gives an overview.
Remove stains on cobblestones and concrete pavements - this is how it works
Stains are not always easy to remove from paving stones and concrete pavements, and unfortunately the material is not immune to all cleaning. In the article you will learn how to remove stains from paving stones without damage.
Instructions: Laying wooden tiles in the garden
Wooden tiles are a good alternative to other floor coverings on balconies and terraces, but are also suitable for pool and sauna areas. Wood looks warm and is a natural material. Wood tiles are easy to lay, but only on a well-prepared subfloor.
Laying clinker pavers correctly + information on prices and dimensions
Pavers are made from clay and fired. They are therefore a product of nature. A natural play of colors is achieved by firing. Temperatures of 1,200 degrees also ensure that the paving stones are extremely resistant to almost all external influences, such as sun, heat, frost and even chemical substances such as alkalis and acids. In addition, they are easy to care for, keep their original color and do not fade. However, one disadvantage has to be mentioned, when it is cold and wet, the stones become very slippery. A little ground frost is enough.
