The top 3 recommendations and buying guides

Our recommendations

Our first recommendation is one of the most popular lattice films on Amazon. The Aquagart film is available there in various widths and lengths. With dimensions of two by six meters, the Greenhouse film(€ 15.60 at Amazon *) for the most Greenhouses(€ 60.76 at Amazon *) big enough. The price-performance ratio is convincing, as numerous reviewers confirm. You describe the Lattice film as very good quality and stable. It's supposed to be strong enough to staple onto wood, and the cutting also seems to work wonderfully. In addition, some report that their plants have never thrived as well as under this film.

Compared to the grid film from Aquagart, the greenhouse film with a grid structure from Connex is significantly less strong. Their fabric weight is only 100 grams per square meter, so it is 0.1 millimeters thick. So it does worse in terms of robustness and stability; however, the lower basis weight is associated with higher light transmission. The white color in which the Connex lattice film is held also contributes to this. Most of the reviewers on Amazon are happy with the greenhouse cover. However, it is sometimes criticized that it cannot withstand more severe weather conditions - such as heavy hail.

The green, semi-transparent grid film by Zelsius measures 143 by 143 by 195 centimeters (width by Length times height) and has a roll-up entrance that is 160 centimeters high and 88 centimeters wide is. It can easily be pulled over a suitable greenhouse - without spending a lot of time and effort. In terms of thickness, it is 0.135 millimeters between the Aquagart and Connex models. The majority of Amazon reviewers are positive about the Zelsius brand lattice film. It should serve its purpose perfectly. But: Some customers state that the UV resistance is not exactly the best.

Purchase criteria

Thickness / grammage / basis weight / fabric weight

Simple rule: the thicker the film material, the more robust, tear-resistant and long-lasting the lattice film. But: The feature also affects the light transmission. Thick foils let less light through than thinner versions. Keep this in mind and draw the correct conclusions about the plants that you want to grow in your greenhouse. By the way: a basis weight / grammage of 100 grams per square meter is synonymous with a thickness of 0.1 millimeters.

Dimensions

When it comes to dimensions, there is no real right or wrong. In principle, a longer and wider lattice film is of course preferable - especially if it costs almost the same as a smaller lattice film with similar properties. So you should consider two points in terms of length and width: First, your needs (which size do you need for your Greenhouse?) And secondly the price-performance ratio (are there price differences between lattice foils that are more or less the same are tall?).

colour

You can choose from white, green or blue lattice film. Which color is more suitable depends primarily on which plants you want to cultivate under the greenhouse film. If the plants need a lot of light to thrive, you should prefer white lattice film because it is more translucent. In contrast, green or blue tinted greenhouse film is recommended if the plants need or want less light.

Light transmission

The light transmission is generally a little less pronounced with lattice film than with smooth greenhouse film. This is due to the grid structure - it does not let the light through as easily as smooth film. In addition, the thickness, the color and the UV protection determine how translucent the lattice film is. The following applies: the thicker, tinted and UV-resistant the film, the less light gets by. Conversely, thin, white and average UV-resistant (UV3) film is relatively transparent to light.

resistance

Temperature resistance: The lattice film must be fully temperature-resistant - that is, it can cope with both heat and cold without any problems. Classic films made of polyethylene are usually resistant from minus 70 to plus 70 degrees Celsius.

UV resistance: UV resistance is also an important feature. Also pay attention to the small print in this regard: Does your chosen lattice film have "UV3", "UV4" or "UV5" on it? The number indicates for how many years the manufacturer guarantees UV protection for the film. In general, grid foils are UV-resistant for three years. You should replace the foil at the latest after the specified time has elapsed.

frequently asked Questions

What is a lattice film?

A grid film is a PP or PE film with a grid running through it. This structure gives it additional stability. Lattice foil is mainly used in the garden Covering greenhouses for use. It is also used in the construction sector. UV stabilizers are incorporated to make the lattice film suitable for outdoor use.

What is the nail edge in the case of lattice film?

Most lattice foils have a nail edge on the long sides - a very strong fabric that is about five centimeters wide and you can feel the attachment and fixation of the foil relieved. In addition, the edge makes the fastening more stable and therefore more secure and “more durable”.

How do I attach the lattice film to my greenhouse?

Thanks to the perforated nail edge, with which many lattice foils are equipped, you can attach the utensil to a wooden frame without much effort. The pre-punched holes make assembly a breeze. The same applies if eyelets are attached to the lattice film. If you should catch lattice film without a perforated edge, simply stick the greenhouse film on with UV-resistant adhesive tape.

Which is better - a smooth film or a lattice film?

Basically, both types of greenhouse film can be of high quality. Each one also has its specific advantages: while lattice film with its lattice structure is more robust and resistant, smooth greenhouse film lets more light through. To create ideal conditions in the greenhouse, you can cover the roof with smooth foil and the sides with mesh foil.

Where is the best place to buy lattice film?

You can find grid film for greenhouses in well-stocked hardware stores such as OBI or toom and in specialist garden centers such as Dehner. Amazon offers you a large selection, low prices and a convenient ordering and return procedure.

How much does lattice film cost?

When comparing the costs of different lattice foils, you should not pay attention to the final price, but rather to the price per meter of length. We also advise you to only ever compare foils that have the same width and grammage. With a two-meter-wide lattice film, the price per meter of length is usually between five and ten euros.

equipment

UV-resistant adhesive tape

If you order lattice film without a nail edge and eyelets, an adhesive fastening is recommended. It is best to use UV-resistant adhesive tape for this. Ideally, the manufacturer already states in its product description that the item is suitable for use in a greenhouse. In addition, the tape should be transparent in order not to attract negative attention.