table of contents
- Weed cutter
- Boiling water
- Flaming device
- high pressure cleaner
- frequently asked Questions
Removing weeds from joints is a chore for many property owners. The right methods help to make gardening easier.
In a nutshell
- Weeds cannot be permanently removed with a joint scraper
- it does not remove the roots
- Various aids for thorough weeding are available
- they are harmless to the environment
Weed cutter
The biggest problem with weeds in joints is the root system. Regardless of whether you are dealing with a dandelion and its taproot or another plant, weeds can only be removed permanently with the root. For this reason, the use of a classic grout brush or a grout scraper is not recommended, as they only remove the above-ground parts of the plant. Instead, rely on a weed cutter. This tool extends to the root of the plant and pulls it out of the ground with it. When choosing a suitable tool, be sure to pay attention to the diameter of the joints. This determines the maximum width of the weed cutter. It is applied as follows:
- Position the weed cutter
- a few inches from the weeds
- stab deep into the ground
- Loosen the soil
- The plant can now be pulled out of the ground
Boiling water
Permanently removing weeds from joints is also possible with boiling water. The liquid penetrates deep into the plant, causing it to perish from within. Depending on the frequency of use, the roots of the weeds are also removed, which is a permanent solution against the weeds. It does not matter whether you use hard or lime-free water. It needs to boil and then pour it directly onto the joints. After about three to four days, the plants are dead and can be swept away with a broom or collected by hand.
Flaming device
The has become one of the most popular devices for long-term weed removal Flaming device established. This burns the weeds, preventing the seeds from spreading. Other methods can still disperse seeds while they are being removed. It looks different with the flame device. If you do not have a flame scarfing device yourself, you can borrow it from hardware stores or specialist companies for around ten euros per day. Pick a day for the procedure when it's not too wet or raining. Then follow these instructions:
- Switch on the scarfing device
- follow the course of the joint
- Hold a flame over individual weeds
- don't linger too briefly over weeds
- this causes heat to get into the roots
- repeat until the entire area is free of weeds
- Switch off the scarfing device
- Thoroughly sweep the surface
Note: You need to use the flaming device regularly, as the flames mainly remove the above-ground parts of the plant. However, the resulting heat ensures that there is no possibility for the seeds to germinate in the joint material for a long time.
high pressure cleaner
Yes, you can take action against the annoying weeds yourself with a pressure washer. The powerful water jet ensures that plants, seedlings and seeds are rinsed out of the joints, which means that settlement is no longer possible and weeds can simply be removed from the joints afterwards can. This is exactly what makes the pressure washer so effective in terms of application. Since in many cases you completely empty the joints when using a high-pressure cleaner, you also need joint sand or a comparable product. You can find out how to use the high-pressure cleaner to permanently remove weeds from the following instructions:
- necessary water pressure: from 10 bar
- normal nozzles are sufficient
- work off the terrace joints with the high-pressure cleaner
- aim the beam directly into the joint
- Do not use in the direction of house walls or fences
- turn away from building structures
- Thoroughly sweep out the joint after use
- Fill the joint with sand
- work in with the broom
- Dispose of weeds in household waste
Note: High-pressure cleaners are ideal if you want to clear a large area of weeds and clean them at the same time. The water jet can be used on the plates without any problems, without damaging them.
frequently asked Questions
To prevent weeds from settling in the gaps, you should weed your garden before the seeds form. That means you have to remove the weeds regularly throughout the year. Another option is to sweep the terrace and path slabs on a weekly basis. Seeds, seedlings and other organic materials are thoroughly swept out of the joint.
Another way to prevent weeds is to use grout. With grout, the spaces between the floor slabs can be sealed thoroughly over a period of several years. This prevents weeds from settling. Remember to check the grout regularly and touch up if necessary.
Avoid using chemical agents as they are not environmentally friendly and often cause more damage than desired. It is not uncommon for flower beds, for example, to also get some of the agent, whereupon the ornamental flowers die. Vinegar essence and salt are also not recommended as they could get into the groundwater.
If you have to bend your knees while removing the weeds, you can use knee pillows. They reduce stress on the knees and make gardening a lot easier when you use a weed cutter.
